SANIDATE 5.0 — MPS – BioSafe Systems

SANITIZER/DISINFECTANT

A 5% peroxyacetic acid product labeled for all sanitation and disinfection applications within hatcheries, egg production, grow out and poultry processing plants. SaniDate 5.0 is a highly stabilized formulation designed to overcome high levels of organic contamination typical of poultry operations.

No mutational resistance

Environmentally responsible chemistry

No run-off or dumping restrictions

Alternative to chlorine

Alternative to Quat

EPA registration No. 70299-19

HOW SHOULD SANIDATE 5.0 BE USED?

Sanitizer/Disinfectant
Sanidate 5.0 can be fogged, foamed or sprayed to sanitize and control pathogens including Avian Influenza commonly found on poultry farms, hatcheries and in processing plants.

Truck/Trailer Disinfection
SaniDate 5.0 effectively prevents cross contamination from vehicles and trailers to poultry farms and facilities.

Poultry Water Treatment
SaniDate 5.0 removes scale, mineral deposits, and biofilms from waterlines and will effectively control algae and bacteria. This EPA registered is also approved for use in poultry drinking water.

Foot Bath Mats, Pads, Walk Through Trays
Place foot bath mats, pads or trays at the entrances of all rooms and buildings to prevent cross contamination.

Mold and Mildew Control
SaniDate 5.0 effectively inhibits the growth of mold, mildew, and the odors they cause when applied to hard non-porous, non-food contact surfaces.

WHAT IS SANIDATE 5.0’S MODE OF ACTION?

SaniDate 5.0 works through an oxidation chemical reaction that kills bacteria and fungus. More specifically, SaniDate 5.0 reacts on contact with the enzymes and proteins that make up simple cell organisms such as animal and human health pathogens.

Truck and Vehicle Sanitation

Bath Mats, Pads and Walkthroughs

Egg Sanitizing

Disinfection Applications

Poultry Water Line Sanitizing

SANIDATE 5.0 IS EFFECTIVE AGAINST

Salmonella

Campylobacter

E. coli

Listeria

Avian Influenza Virus (H9N2)

Pseudomonas

Mold & mildew

Staph

Strep

Pediococcus damnosus

Klebsiella pneumoniae

Staphylococcus aureus

Listeria monocytogenes

Enterobacter aerogenes

Streptococcus agalactiae

Bacteroides melaninogenica

Staphylococcus aureus

Lactobacillus malefermentans

Aspergillus fumigatus

Salmonella enterica

Pseudomonas aeruginosa

Bordetella bronchiseptica

Streptococcus uberis Fusobacterium necrophorum

Streptococcus dysgalactiae Trichophyton mentagrophytes

Methicillin-resistant Staphylococcus aureus (MRSA)

APPLICATIONS

Thoroughly wash surfaces and rise with potable water. Add 1.6 fl. oz. SaniDate 5.0 to 5 gallons of potable water (147 ppm of active peroxyacetic acid) and apply by wiping, mopping, or coarse spray, or by adding to closed system. Allow a contact time of one (1) minute. Allow items and/or surfaces to drain thoroughly.